SH6
$447.27 M
Item on Back Order

PBH & 5" STEEL SCREW

SH6

EIFS MECHANICAL FASTENER *NONRETURNABLE/NONREFUNDABLE

Weight

32 lbs.

EIFS PBH WASHER PRE-ASSEMBLED WITH STEEL SCREW 


Assembled PHB EIFS Washers and Steel Fasteners for adherig EPS Foam to 12- to 20-gauge steel studs. EPS Sheathing board thickness should be added the dimensions.

  • Box of 1000, EIFS Steel Screws

  • Degegrashield® Protection for Exterior Applications on EIFS or Decks: Meets or exceeds ASTM B117 20 cycles - 10% or less red rust. Salt spray 500 hours - 10% or less red rust on our wood lite metal and steel screws.

  • Excellent for use in fastening foam to EIFS walls or on exterior decking

 

EIFS Steel screws fasteners must have the best available protective coating. Because of this, we only offer the highest quality coated fasteners you can buy. All of our  EIFS steel fasteners have the approved DegraSheild® exterior quality coating.

 

Our fasteners not only meet the EIFS fastener coating requirement -- We Exceed Them!

Installation Points:

 

1.  Insulation Board shall be attached to the approved substrate horizontally with vertical joints staggered and butted tightly.

2.  PBH is designed to be used with EIFS Manufacturers

PB EIFS systems.

3.  Screws shall meet ASTM B117

4.  Install the PBH EIFS washers in a manner so the fastener

is flush with the surface of the Insulation Board. Do not exceed 1.6 mm (1/16”) below the surface.                                        

5.  Rasp the surface of the Insulation Board with a DuraRasp, TigerClaw or DuraVac DuraRasp™ to remove any irregularities.

Yes, I would like to get more information from my sales technician.