*CASE 12*, PROLOK, FREE GUN FOAM TO FOAM PU ADHESIVE NON-RETURNABLE/NON-REFUNDAB
ProLok™ Professional High-Bonding Spray Foam
Demand's Original Pro-Lok™ spray foam is a low expanding, high bonding adhesive. An excellent resource for any on-site construction adhesion needs. Works great with EIFS, ICF and SIPs, architectural foam shapes, as well as stone work, gypsum board, brick and cement boards. Unmatched elasticity and flexibility as the form expands and compresses. Seals cracks and fills in gaps.
PRODUCT FEATURES
- Low expansion
- High bonding polyurethane strength
- ONE-STEP adhesive (once initial contact is made, there is NO need to pull apart)
- B2 Fire rated economically insulates, fills, seals and bonds
- Easy to use
- High insulating value-saves energy and money
- 18 month shelf life
* Pro-Lok is prohibited on all domestic and international AIR shipments.
Technical Data
| Basic Component | Polyurethane |
| Type | Gun type |
| Tack-Free Time(min) | 20 |
| Cutting Time(min) | 60(+25℃) |
| Density(kg/3) | 25-35 |
| Adhesion to EPS(N/mm2) | 0,033 |
| Adhesion to XPS(N/mm2) | 0,039 |
| Thermal conductivity (W/m2K) | 0,034 |
| Adhesive strength(kPa) | 11,2 |
| Tensile strength(N/cm2) | 12 |
| Compressive strength(kPa) | >150 |
| Fire Class of the cured foam | B2 |
| Environment | Contains no CFC’s, no HCFC’s, Ozone friendly |
| Toxicity of cured foam | Non-toxicity |
| Cured foam temperature endurance(℃) | -40℃~+120℃ |
| Processing temperature(℃) | +5℃ to +35℃ |
| Output (m² of wall surface) | 12 |
| Shelf life(month) | 18 |
EPS – Expanded Polystyrene
XPS – Extruded Polystyrene
The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.
Application conditions:
Usage temperature between +5℃~+35℃, best result at 20℃. The cured foan temperature endurance -40℃~+120℃
Non suitable for structural bonding