POLY-SPRAY™ POLYURETHANE SPRAY FOAM HARD COAT SYSTEM

^{_{A Polyurethane Hard-Coat Foam Coatings Spray System for the Small User!}}

Apply PolySpray with our Poly Spray Gun, PSG. Typical applications are completed with 10-50 mils of coating depending on the substrate and desired impact resistance.  The applied coating will set in 7 minutes at 70°F, depending on film thickness, liquid material temperature and the substrate. It can be placed into services after 24 hours of cure time at 70°F minimum. It is encouraged to begin priming or painting the plastic at the first sign of cure, to maximize adhesion. Be sure to pretest untried paint for adhesion.

• Environmentally Safe Foam Hard Coat

• Low VOC's

• One Poly Spray Hard Coat 1500 ml Dual 750 ml Cartridge Set Covers 21 sq. ft. @ 30 mils

• Water Resistant

• Polyurethane Hard Coating Is Paintable and can use a primer for better adhesion

• 100% Solids, Two-component Aromatic Polyurethane

• Dries in 7 Minutes at 70 Degrees

• Color Is Neutral

• Foam Hard Coat May Be Painted after 7 Minutes

NOTE: PLEASE SHAKE WELL BEFORE USE